| Physical Properties Halocarbon Greases* | |||||
| Grease | NLGI | ATSM Penetration |
Service Temperature |
Minimum Drop Melting Point |
Description |
| Silica Thickened Greases | |||||
| 32 | 1 | 330 | -15ºF to 350ºF -25ºC to 175ºC |
None | Softest grease with broad temperature range. |
| 28 | 2 | 280 | -15ºF to 350ºF -25ºC to 175ºC |
None | This grease also available with rust inhibitor (28 I) which has a recommended service temperature of 0 to 250ºF (-20ºC to 120ºC). |
| 28LT | 2 | 280 | -50ºF to 200ºF -45ºC to 95ºC |
None | For low temperature use. Also available with rust inhibitor (28 LTI). |
| 25-5S | 3 | 230 | 0ºF to 350ºF -20ºC to 175 ºC |
None | Lowest vapor pressure. Also available with rust inhibitor (25-5SI) which has a recommended service temperature of 0ºF to 250ºF (-20ºC to 120ºC). |
| 19 | 4 | 190 | -15ºF to 350ºF -25ºC to 175 ºC |
None | Hardest grease with broad temperature range |
| Polymer Thickened Greases1 | |||||
| 25-10M | 1 | 300 | 30ºF to 275 ºF 0ºC to 135ºC |
300ºF 150ºC |
Softest grease for wide temperature service. |
| X90-10M | 1 | 330 | -40ºF to 200 ºF -40ºC to 95 ºC |
300ºF 150ºC |
For low temperature use. |
| 25-20M | 4 | 200 | 20ºF to 300 ºF -5ºC to 150ºC |
320ºF 160ºC |
Hardest grease with broad temperature range. |
| PTFE Thickened Grease | |||||
| MT-3I | 3 | 230 | 0ºF to 350 ºF -20ºC to 175ºC |
None | This grease contains moly and a rust inhibitor. |
| 1 All greases are available with rust inhibitors.
* These tables give typical properties (not specifications) based on historical production performance. Halocarbon Products Corporation does not make any express or implied warranty that these products will continue to have these typical properties. |
|||||